Home
   
Xtrdr
 
Anet A6  Upgrade
 
CR-10S Upgrade
 
Vulcan Bot Printer
 
Vulcan Pro Printer
 
Support Developments
 
X
stuff
X
stuff
Your shopping cart is empty.
Xtrdr is offered for DIY Only
as a service to the open-source community


Xtrdr is a simple, easy to build, install, and maintain extruder using the famous trouble-free E3D hot end. Xtrdr is an adaptation of the time-honored whosawhatis Minimalistic design.
  • Xtrder should be printed with PLA, PLA Plus, or PETG.
  • Being a direct drive extruder, Xtrdr will print all filaments (including TPU flex) with no retraction stringer issues.
  • Even with a 40mm 64oz.in Nema17 Stepper Motor the Xtrdr weighs the same as an expensive Aero Titan.
  • With an MK8 drive gear, Xtrdr reliably prints PLA 1.75mm filament at 100mm/sec.
  • Use genuine E3D or Chinese clone Direct Drive J-head hot end.
  • Knurled knob on motor shaft for easy filament changes.
  • Quick removal part cooling fan for prints not requiring cooling.
  • The 5mm mount holes on the Xtdr body are spaced 20mm apart for attaching to an OpenBuilds mini-v-wheel plate but can be attached to custom mounts for other designs.


DIY Links: Download Sketchup file for DIY editing from Xtrdr SKP
Download Sketchup file for DIY editing from Xtrdr Fan SKP

Download STL file for DIY printing from Xtrdr STL
Download STL file for DIY printing from Xtrdr Fan STL

BOM for DIY (View PDF)


Copyright © 2013-2019 • All Rights Reserved WrxWare LLC
Jerome, Idaho USA